Lukas QVIA Hardwire Cable


or 4 payments of $8.75 with Afterpay

Genuine Lukas QVIA Accessory

Provides Constant Power to Dash Cam

Allows Parking Mode Recording

Direct Hardwire into Fusebox

Prevents Vehicle Battery From Fully Draining

Voltage & Timer Cut-Off Settings Configurable via QVIA App

10 Voltage Cut-Off Points

7 Timer Cut-Off Points


Lukas are one of the leading and most professional Korean based Dash Cam manufacturers that have been specialising in high-end Dash Cam production since 2009. Korean Dash Cams and Korean made Dash Cam quality is world renowned thanks to their attention to detail during design, testing and production.

The QVIA branded Dash Cams are Lukas’ premier, top of the line models that are impeccably designed, built and manufactured. The QVIA Dash Cam line up is made up of durable and reliable units that boast the highest temperature resistant ratings on the global Dash Cam market. The QVIA Dash Cam design and features are clean, professional and confident which is attributed to Lukas’ high expectations on innovation and quality.

This dedicated QVIA Hardwire Cable is for use with Lukas QVIA QR790 and QVIA AR790 model Dash Cams

(The Lukas QVIA QR790-1CH and 2CH models come with the hardwire cable already included in the box).

Allows the advanced Parking Mode features of the Qvia Dash Cams to operate by providing constant power to the Dash Cam when the engine is off

2 x Parking Mode Recording Options – Dual Motion & Impact Detection or Time-Lapse recording to monitor your vehicle while parked

Voltage protection settings and Timer cut off settings configurable via the QVIA App

Voltage protection prevents your car battery from draining

Direct wire installation into the fusebox

Yellow wire = Battery/”Constant or Always On” Circuit

Red wire = ACC/”Switched” Circuit

Black wire = Ground

3 metre cable length

10 Voltage Cut-Off Points – 11.5/11.6/11.7/11.8/11.9/12.0/12.1/12.2/12.3/12.4 V

7 Timer Cut-Off Points – 3/6/9/12/24/36/48 hours


Note 1: The Lukas QVIA Dash Cams will operate without this hardwire kit via the supplied power cord plugged into your cigarette lighter socket. You just won’t be able to use the Parking Mode feature this way as it will shut down when the engine is off. Do not chop the standard QVIA power cord (included in the box) and feed the wires directly into the fusebox. You will void the warranty and damage your Dash Cam. Always hardwire via this QVIA hardwire cable.

Note 2: It is highly recommended that any hardwire kit be installed by a certified/qualified Auto Electrician with Dash Cam installation experience. The hardwires need to piggy back off particular circuits in the fusebox. You do not want to tamper with essential safety circuits like airbags or other safety system circuits. Cutting the black cord to the camera body will void any warranty.

Note 3: Hardwiring any item to your fusebox could void a new car warranty. Always check with your car manufacturer/dealer before installing a hardwire kit.  Always check with your car manufacturer/dealer if a hardwire kit is compatible with your vehicle electrical system before installing. If hardwiring is an issue, a non-hardwire option is the Cellink NEO battery pack.



Full HD / HD


2.4 / 2.0

Frames per Second

30 FPS / 15 FPS

Working Temperature

-20°C ~70°C

Memory Card

Supports up to 64GB SD Card (16GB included)