or 4 payments of $74.75 with
[ON BACKORDER] – ETA 1st December
Expansion Pack for Extended Recording
Simply Plugs into Primary Cellink NEO Battery Pack
Companion Expansion Pack for Primary Cellink NEO
Extends Recording Times in Parking Mode
Easy DIY Installation – simply plugs into Cellink NEO Battery
No need to hardwire your Dash Cam to car battery
NEO charges through cig lighter socket
Up to 50 hrs run time 1-CH Dash Cam
Up to 30 hours run time 2-CH Dash cam
Highest Quality LiFePO4 Battery
Authorised Australian Cellink Reseller
12 Month Warranty
The Cellink NEO expansion pack is the perfect companion for the primary Cellink NEO battery pack if you are wanting to extend your recording times in parking mode.
When charging through a cigarette lighter socket, the Cellink NEO + Cellink NEO Expansion Pack combo fully charges after approx 1 hr 40 min of driving time.
It offers the longest duration of recording time compared with any other model. When the 2 packs are fully charged, continuous running times include up to 30hrs for a 2-channel Dash Cam and 50hrs for a single channel Dash Cam (approx depending on camera brand/model and settings). However, these running times are for continuous, non-stop recording. Most proper Parking Mode Dash Cams record only when motion is detected so the battery life/recording time is even longer.
The NEO has a sleeker and more minimalist design to stylishly blend in with your car. It now has integrated Bluetooth connectivity to pair with a smartphone. The dedicated Cellink NEO App allows you to view the battery % level, whether it is charging or discharging, how long it can power the Dash Cam for and how long it will take to fully charge.
The system works by charging a high quality lithium iron phospahte (LiFePO4) battery through your cig lighter socket socket while your car is running. When your car is turned off, the charged battery is then used to provide continuous power to your Dash Cam without the need to draw any power from your car battery. This process is very effective in reducing the risk of battery discharge, low voltage electrical warnings and flat car batteries.
*Not compatible in 24V systems (trucks, commercial vehicles)
*Cellink NEO expansion pack cannot be used by itself, only works when connected to primary Cellink NEO battery
1. If charging the Cellink NEO through your vehicle cigarette lighter socket, make sure the input power switch is set on LOW (5A)
Once the Cellink NEO is connected to the cigarette lighter socket and operating, never turn the switch to HIGH (9A) during operation. This may cause functional failures, overheating, or damage to the cables and ignition due to overcurrent.
2. If hardwiring the Cellink NEO into a fusebox, make sure the power switch is set on HIGH (9A)
3. Not compatible in 24V systems (trucks, commercial vehicles)
Charge time and capacities below are approx doubled when using the primary Cellink NEO + the NEO expansion pack.