Genuine Cellink Battery Pack
Longest Parking Mode Power Source
Charges while driving
Charges from either cig lighter or fusebox
Powers Dash Cam while parked
View battery status via Cellink App
Up to 35 hrs run time 1-CH Dash Cam
Up to 22 hours run time 2-CH Dash cam
Highest Quality Samsung LiFePO4 Battery
5V USB port to charge other devices
12 Month Warranty
The Cellink NEO8+S External Battery Pack is a high capacity battery system designed to offer the longest parking mode recording times.
The Cellink NEO8+S battery can provide continuous power for up to 22hrs for a 2-channel Dash Cam and up to 35hrs for a single channel Dash Cam (approx depending on camera brand/model and settings). However, these running times are for continuous, non-stop recording.
Most proper Parking Mode Dash Cams record only when motion is detected so the battery life/recording time is even longer.
The system works by charging a high quality lithium iron phosphate (LiFePO4) battery through either your cig lighter socket or fusebox while your car is running. When your car is turned off, the charged NEO8+S battery is then used to provide continuous power to your Dash Cam without the need to draw any power from your car battery.
Charging the Cellink NEO8+S via the fusebox is faster (approx. 50 min charge time), but if you don’t want to hardwire anything into the fusebox, it can be charged it up via your cig lighter socket (approx. 90 min charge time).
The Cellink NEO8+S battery is compatible in 12V vehicle systems only.
The NEO8+S also has a 5V USB port so you can connect other devices and charge them up (eg. smartphone, tablet)
The battery charge level can also be checked via the free Cellink battery bluetooth app.
If you can’t or don’t want to install a Dash Cam hardwire kit to your car’s fuse box, the Cellink NEO8+S is the plug and play solution for powering your Dash Cam during Parking Surveillance Mode recording.
*Not compatible in 24V systems (trucks, commercial vehicles)
1. If charging the Cellink NEO8+S through your vehicle cigarette lighter socket, make sure the input power switch is set on FIX
Once the Cellink NEO8+S is connected to the cigarette lighter socket and operating, never turn the switch to ADJ during operation. This may cause functional failures, overheating, or damage to the cables and ignition due to overcurrent.
2. If hardwiring the Cellink NEO8+S into a fusebox, make sure the power switch is set on ADJ
3. Not compatible in 24V systems (trucks, commercial vehicles)
4. If connecting the Cellink NEO8+S to a Lukas, BlackSys, FineVu or BlackVue X series Dash Cam, the Dash Cam hardwire cable must be connected to the 3-wire output cable of the NEO. This allows park mode to activate and deactivate correctly.