$299.00 Original price was: $299.00.$289.00Current price is: $289.00.
[CLICK TO READ OUR 2025 DASH CAM PICKS]
Genuine Cellink Battery Pack
Slim Line Design
Charges while driving
Charges from either cig lighter or fusebox
Powers Dash Cam while parked
Up to 30 hrs run time 1-CH Dash Cam
Up to 20 hours run time 2-CH Dash cam
Highest Quality Samsung LiFePO4 Battery
12V Compatibility
24 Month Warranty
The Cellink NEO 6 Slim External Battery Pack is a compact and reliable power solution designed specifically for Parking Mode dash cam setups. With a slimmer profile and efficient lithium iron phosphate (LiFePO4) battery technology, it provides extended recording times without draining your car battery.
The Cellink NEO 6 Slim can deliver up to 20 hours of continuous power for a 2-channel dash cam and up to 30 hours for a single-channel dash cam. These estimates may vary depending on the camera model and settings.
Since most Parking Mode dash cams only record when motion or impact is detected, actual usage time is often even longer than the rated continuous times.
The system charges while your vehicle is running—either via the cigarette lighter socket or hardwired to the fusebox. Once the engine is off, the fully charged NEO 6 Slim automatically takes over and powers your dash cam, ensuring uninterrupted Parking Mode recording without draining your car battery.
Hardwiring to the fusebox allows for faster charging in approximately 60 minutes. Alternatively, if you prefer a plug-and-play setup, charging through the cigarette lighter socket takes about 80 minutes.
The Cellink NEO 6 Slim is suitable for use in 12V vehicle systems only.
*Not compatible with 24V systems such as trucks or commercial vehicles.
To view the higher capacity battery pack check out the Cellink Neo8+ Dash Cam Battery Pack HERE
Important Notes:
1. When charging the Cellink NEO 6 Slim via your cigarette lighter socket, make sure the input switch is set to FIX.
Once connected to the cigarette lighter socket and operating, never switch to ADJ. Doing so may cause functional issues, overheating, or even damage to the ignition and wiring.
2. If hardwiring to a fusebox, set the power switch to ADJ.
3. This product is not compatible with 24V electrical systems.
4. When using with dash cams such as Lukas, BlackSys, FineVu or BlackVue X Series, ensure the 3-wire output cable is connected properly. This enables correct Parking Mode activation and deactivation.
** EOFY DASH CAM SALE NOW ON + FREE EXPRESS POST ** |