CELLINK NEO EXPANSION PACK

Description

The Cellink NEO expansion pack is the add-on companion for the primary Cellink NEO8+S battery pack if you are wanting to extend your recording times in parking mode.

When charging through a cigarette lighter socket, the Cellink NEO8+S + Cellink NEO Expansion Pack combo fully charges after approx 1 hr 40 min of driving time.

It offers the longest duration of recording time compared with any other model. When the 2 packs are fully charged, continuous running times include up to 44hrs for a 2-channel Dash Cam and 70hrs for a single channel Dash Cam (approx depending on camera brand/model and settings). However, these running times are for continuous, non-stop recording. Most proper Parking Mode Dash Cams record only when motion is detected so the battery life/recording time is even longer.

The NEO8+S & expansion pack system has integrated Bluetooth connectivity to pair with a smartphone. The dedicated Cellink NEO App allows you to view the battery % level, whether it is charging or discharging, how long it can power the Dash Cam for and how long it will take to fully charge.

The system works by charging a high quality lithium iron phosphate (LiFePO4) battery through your cig lighter socket socket while your car is running. When your car is turned off, the charged battery is then used to provide continuous power to your Dash Cam without the need to draw any power from your car battery. This process is very effective in reducing the risk of battery discharge, low voltage electrical warnings and flat car batteries.

*Not compatible in 24V systems (trucks, commercial vehicles)

*Cellink NEO expansion pack cannot be used by itself, only works when connected to primary Cellink NEO8+S battery

Need more help, tips & advice? Read our Information & Advice articles for our latest Dash Cam buying guides, tips & advice (click here)

Notes:

1. If charging the primary Cellink NEO8+S through your vehicle cigarette lighter socket, make sure the input power switch is set on FIX

Once the primary Cellink NEO8+S is connected to the cigarette lighter socket and operating, never turn the switch to ADJ during operation. This may cause functional failures, overheating, or damage to the cables and ignition due to overcurrent.

2. If hardwiring the Cellink NEO8+S into a fusebox, make sure the power switch is set on ADJ

3. Not compatible in 24V systems (trucks, commercial vehicles)

What’s in the box?

• Cellink NEO expansion battery
• Connection cord to plug into Primary Cellink NEO8+S
• Adhesive velcro strips